Sea Tel 4012 GX KU-BAND Installation Manual download pdf (Page 23)

Site Survey 4012 GX Installation Manual

2-7

2.9. Grounding

All metal parts of the ADE shall be grounded to bare metal at the mounting pedestal. Grounding straps from the base

of the ADE to a dedicated lug on the mounting pedestal are preferred, but grounding may also be accomplished by

exposing bare metal under all mounting bolts prior to final tightening. Preservation of the bare metal should be done

to prevent loss of ground.

Grounding should be ensured throughout the entire mounting to the hull. While it is presumed the deckhouse is

permanently bonded and grounded to the hull, in cases where the deckhouse and hull are of different materials a

check of an independent ground bonding strap should be made. Masts should be confirmed to be grounded to the

deckhouse or hull.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 102 103

No comments

Sea Tel 4012 GX KU-BAND Installation Manual Page 23